Having trouble with HAWK c130

[Chammy]

I want to get some units into the C130 from HAWK but they  are gvni the command and they go next to the plane but never get in.Help?Or if the maker is out there?

[BrAinOfJ]

In the init field of all the guys you want to be passengers, simply place guy assignascargo plane where guy = the units name and plane = the planes name. [edit] Or better still this assignascargo plane . this allows you to copy and paste the init field without typing it in each guys field if u have lots of guys. Ive had 20 men in a hawk c130...

Then, when making the "getin" waypoint for the group of guys, hold down the shift key and double click on the aircraft. This will fix that waypoint to that aircraft.

If your scripting the whole mission, its a little trickier, and a little beyond my realm of expertise. But still using the assignascargo command in the init field of you passengers, the scripted line to get them to board the plane might look like this [guygroup,0] setWPPos getPos plane where guygroup = the name of the group the passengers are in (use setgroupid command) and 0 is the which ever number the waypoint is within the order eg. the 1st waypoint = 0, the 2nd waypoint = 1, 3rd waypoint = 2 and so on...
 If scripting, try that... if im wrong, ill be corrected shortly, but play around, you might luck it

[Chammy]

Hey thanks. Well , what i was trying to do was have them out of the plane and then give the command or set it as waypoint so that when the mission comes on we will get into the plane.Well I can get in and then they try but they dont get in.stumped