activating a trigger when unit1 and unit2 are present

[wastzzz]

like subject.. i need to activate a trigger when both unitName1 and unitName2 are present in the trigger area.
any suggestion please?

oh, another question: how do i make it triggerable only if those units are are on foot?

[bedges]

trigger's condition -

Code: [Select]

(unit_1 in thislist) and (unit_2 in thislist) and ((vehicle unit_1) == unit_1) and ((vehicle unit_2) == unit_2)
untested, but i think it's okay.

oh, and welcome to OFPEC!  :thumbsup:

[wastzzz]

thanks
and what if i want to activate a trigger only if unit1 and unit2 are inside the area (no matter if they are on a vehicle or on foot) ?

[bedges]

then leave out the last two vehicle bits...

[wastzzz]

then leave out the last two vehicle bits...

ye i tried that, however it works if the 2 units are on foot, but doesn't work if they are on a vehicle togheter :|

[rhysduk]

Try this:

(unit_1 in thislist) and (unit_2 in thislist) and (unit_1 in jeep1) and (_unit2 in jeep1)

where jeep1 is the name of the vehicle

Rhys

[Cheetah]

Or you can check the distance between the trigger and your soldiers with the distance command.

Because it can be the problem that only the name of the vehicle is in the array and not the unit in the vehicle.

[wastzzz]

Try this:

(unit_1 in thislist) and (unit_2 in thislist) and (unit_1 in jeep1) and (_unit2 in jeep1)

where jeep1 is the name of the vehicle

Rhys

i don't wanna name the vehicle, could be any

[JasonO]

Try putting vehicle instead of jeep1.. Although that is a guess. If someoen replies sooner with a known fix then take that option 

[Chris Death]

Condition:

Code: [Select]

vehicle unit1 in thislist AND vehicle unit2 in thislist
~S~ CD

[wastzzz]

Thanks Chris Death, it works