Home   Help Search Login Register  

Author Topic: Setting up triggers  (Read 33977 times)

0 Members and 2 Guests are viewing this topic.

Offline Dragon 6

  • Members
  • *
  • CENTCOM
    • [url=http://imageshack.us][img=http://img105.imageshack.us/img105/7548/dragon6ua7.jpg][/url]
Setting up triggers
« on: 05 Apr 2005, 19:54:52 »
Hallo Guys,
I would like to setup a counter atk for the East with some triggers. All I want is when vehicle 1 is destroyed (East), that it triggers four Mi-28s to a certain location, to slow down or stop the west`s movement. Any ideas???? I sure could you some help.

Dragon 6

Offline Terox

  • Former Staff
  • ****
  • Follow the Sappers!
    • zeus-community.net
Re:Setting up triggers
« Reply #1 on: 05 Apr 2005, 20:15:41 »
Trigger
Activation: None
set to: Repeatedly
Condition: !alive vehicle1
On Activation: see notes below

as per the activation, this would be the system that you use to get the supporting vehicles to the enemy

if its a chopper, then try this
On Activation: helo1 setfuel 1

and have the chopper set up in the following way

name it helo1, remove all its fuel, place it on the ground with decent clearance for takeoff

set its waypoints to wherever you need them, i would use a search and destroy waypoint for the attack area.

If the position of the attack is dynamic, eg changes, depending on where vehicle1 was destroyed for instance, then in the first waypoint's On activation box, place the following line

[helo1,x] setwppos getpos vehicle1

X being the number for the search & destroy waypoint

that'll do it for ya


Zeus ARMA2 server IP = 77.74.193.124 :2302
Teamspeak IP = 77.74.193.123