flyinhieght problem

[garret64]

no matter what i do this helecopter will not fly in the hieght i specify.

It starts on the ground, waits for the men to get in, then takes off to the LZ which is on top of a building.

in the waypoint before the build i have flyinhieght 25

at the waypoint over the building i have flyinhieght 3

the second is becasue i flew a helicopter over the building and my altitude changed, acting like the roof of the building was the ground.

but no matter what the helecopters flys at about 45m and stays there.

i read a while ago somewhere there are other ways to do hieght instead of the flyinheight commands, but i dont remember what, and i cant find anything anywhere that will help me with this problem in the forums or the editors deopt

any help would be nice, thanks.

[Artak]

check that your giving the order to the right unit ie. that you haven't made a typ0 when typing in the unitname.

[garret64]

ok that was a problem, the name was wrong in the on act field of the waypoints, so now hes at the right hieght

i also had to move the position of the waypoints but it works now.

thanks, its always the little thing that gets ya.