Get in?

[The-Architect]

I had two guys standing near a jeep.

I put a waypoint on them which waited a few seconds, then a waypoint on the jeep which was a Get In waypoint.
After the few seconds is up, the leader of the group gets in but the other guy just stands there. The next Move waypoint isn't fulfilled because no2 isn't in the jeep.

What's going on here?

[h-]

I have had similar results, usually none of the group gets into the vehicle..
Somehow it seems like the getin waypoint is fubar..

Have you tried using 'Get In Nearest'?

[Mandoble]

There is a BIG problem in ArmA with units trying to reach the real getin position. Basically, the AI is SO SO tard that is unable to solve the path to a getin position 4 meters away, so they simply dont move to board the vehicle. In fact, this is the main reason I simply dont play ArmA, only a bit of scripting.

[The-Architect]

Bugger. Where does that leave me?

[Trash Can Man]

What I found that I had to do is simply have one moveindriver and the other moveincargo. I'm not sure if this is what you are looking for. Also, some of the time I put the "get in" waypoint over the name of the vehicle and that seems to work. But, it's not 100% effective.

TCM

[DucusSumus]

Strange.  I've never seen this occur.  Get In waypoints work just fine for me.  Are you using 1.07?

[h-]

@Archy
Did you try the 'Get In Nearest'?
I have a faint memory of it working a bit better..

[Mr.Peanut]

OFP units also used to get stuck sometimes on the corner of a vehicle while trying to get in. I would probably have the waypoint run a script from the On Activation that gives the units 30 seconds to get in, and if they do not then move the stewpid lovers in. On second thought, I would run the script from a WP very near and just before the GetIn, otherwise the code will not execute (I think.....  )

Also, what happens if you put the GetIn waypoint very close to, but not right on the jeep?

[The-Architect]

None of the above worked. I guess it's just a case that Civs grouped to East won't behave like east in vehicles.

It means a rethink but it's not the end of the world. When the community creates some real guerrila units I'll be able to use them instead. Hey ho. 

[DucusSumus]

Try this.

Just make it a move waypoint, and in activation type:

Code: [Select]

unitA assignAsDriver car;{_x assignAsCargo car} forEach [unitB,unitC,unitD,unitN];[unitA,unitB,unitC,unitD,unitN] orderGetIn true
Replace unitA with the name of your driver and unitB,unitC,unitD, etc. with your other units.  If you only have one other unit apart from the driver, you don't need the {}forEach in there; just erase the array and change _x  to the name of the unit that you want to get into the back.