Home   Help Search Login Register  

Author Topic: Help with configfile for sniper rifle - Zooming  (Read 1219 times)

0 Members and 1 Guest are viewing this topic.

brsseb

  • Guest
Help with configfile for sniper rifle - Zooming
« on: 10 Oct 2002, 15:48:16 »
Hi

Ive made a sniper rifle for ofp. The model is finished and Ive made a configfile. Now I want to modify the optic zooming for the rifle (ive inherited the m21 class)

But I dont understand the attributes that dealts with sniperrifle optics and the Commented Config files didnt offer much help. So could someone explain these propeties:

opticsZoomMin
opticsZoomMax
distanceZoomMin
distanceZoomMax
dispersion;

Offline SelectThis

  • Former Staff
  • ****
  • .
Re:Help with configfile for sniper rifle - Zooming
« Reply #1 on: 10 Oct 2002, 18:36:25 »
some info for you.

The value you put into those definitions (the scopevalue) can be derived from the following formula.

scopevalue=0.7*magnification value^-1

where the "maginification value" is the magnification level you want to achieve.

So a scopevalue of 0.35 will give you a mag level of x2
0.175 gives x4
1 gives x7
etc.

The min/Max is also reversed from what you would think them to be.

eg the M21 values:
opticsZoomMin=0.040000;
opticsZoomMax=0.120000;
distanceZoomMin=400
distanceZoomMax=80

the "min" actually refers to the higher magnification level
the 0.04 = x17.5 magnification
the 0.12 = x5.8 magnification

the distancezoommin/max you use to center the scope.

SelectThis