Boolean problem

[Mandible]

Hi,

after more than a year off I'm trying myself at mission editing again. Back to basics now and I've got following problem.

I try to set a trigger if soldier 1 or soldier 2 or soldier 3...dies

I'm using the following command in the trigger

condition: (not (alive name01) or (not (alive name02)....

activation: alarm

this always used to work, but now it doesn't. Tried to find something about it in the Forum on this, tried different commands using the command reference, but nothing helps. the trigger doesn't fire...

Anyone could help?

I'm using OFP 1.91

[AK-Chester]

Hm, since you didn't post the whole condition line, I can't be sure, but I'd say: check the brackets. Or leave them away completely, like...

Code: [Select]

not alive unit01 or not alive unit02 or not alive unit03...or...

Code: [Select]

!alive unit01 || !alive unit02 || !alive unit03...and so on.

[Mandible]

Hi,

sorry to have bothered, but after 3 hours of trying I found the solution : just did it in an sqs file. Works now. However, still intreagues me why that didn't work.

Thanks for the help.  

[Morglor9]

I agree with AK-Chester. I find brackets to be screwy, and don't use them unless absolutely necessary.

[dmakatra]

Brackets are your livesaver, but you have to know where to use 'em.

:beat: *Gets Shot* :beat: