Author Topic: how do i find out if a unit has fired.... (Read 487 times)

wired · « **on:** 03 Dec 2003, 17:57:59 »

How can i find out if the selected guy has fired his weapon?
Say the start of my script starts like....
_man = _this select 0

how do i find out if he fires his weapon, whether he fires it blindly or at someone, it doesn't matter.

By the way i hav 1.46 and dont tell me resistance is worth buying because im not thick and i know that!

m21man · « **Reply #1 on:** 03 Dec 2003, 18:04:31 »

That would be best done with eventhandlers. Unfortunately, you need Resistance to use them

.

wired · « **Reply #2 on:** 03 Dec 2003, 18:05:41 »

is there no command like "hasfired" or something?

m21man · « **Reply #3 on:** 03 Dec 2003, 18:06:43 »

Check the ComRef, I don't have one at the moment. I'll post back if I find anything.

wired · « **Reply #4 on:** 03 Dec 2003, 18:09:51 »

cheers, i'll check it!
All i need is the script to find out if i have fired! D**M!!!

Blanco · « **Reply #5 on:** 03 Dec 2003, 22:10:06 »

indeed , with an eventhandler "fired" or with a ammocheck when you don't have Resistance.

Author Topic: how do i find out if a unit has fired.... (Read 487 times)

wired

how do i find out if a unit has fired....

m21man

Re:how do i find out if a unit has fired....

wired

Re:how do i find out if a unit has fired....

m21man

Re:how do i find out if a unit has fired....

wired

Re:how do i find out if a unit has fired....

Blanco

Re:how do i find out if a unit has fired....

Sitemap