Home   Help Search Login Register  
« previous next »
Pages: [1]   Go Down

Author Topic: question  (Read 758 times)

0 Members and 1 Guest are viewing this topic.

Vulture

  • Guest
question
« on: 02 Oct 2003, 18:01:04 »
this may be a stupid question, but how do you make the AI follow a waypoint coninueously. E.G. a patrol or guard duty etc.
Logged

m21man

  • Guest
Re:question
« Reply #1 on: 02 Oct 2003, 18:07:17 »
This is probably in all the basic mission editing tutorials, but here goes: Make a circle/square/etc patrol pattern with "move" waypoints. At the last waypoint, make a loop waypoint near the first. The patrol will now repeat the patrol pattern infinitely.
Logged

Offline Wolfrug

  • Addons Depot
  • Former Staff
  • ****
  • Official OFPEC Old Timer
Re:question
« Reply #2 on: 02 Oct 2003, 18:08:55 »
The name of the waypoint in question is actually the cyclewaypoint  ;)

Otherwise it's all good. :toocool:

Wolfrug out.
Logged
"When 900 years YOU reach, look as good you will not!"

Offline The-Architect

  • Former Staff
  • ****
  • Bite my shiny metal...
    • Bob's Un-official Flashpoint Page
Re:question
« Reply #3 on: 02 Oct 2003, 18:13:31 »
You can double click on the unit who started the patrol and choose cycle if you want the guy to loop from where he started or you can put a cycle on top of any other waypoint along the route to make the guy cycle from there.
Make sure you zoom right in so the cycle waypoint is touching or directly on top of the other one.
The-Architect
Logged
James Andrew Wilkinson 1977 - 2005 R.I.P.
"If it ain't the friggin' incoming it's the friggin' outgoing. Only difference is who gets the friggin' grease, and that ain't no friggin' difference at all."

Offline dmakatra

  • Members
  • *
  • Better known as Armsty
Re:question
« Reply #4 on: 02 Oct 2003, 19:39:18 »
And if you want to cancel a cycle WP read my Switch Trigger tute @ ed depot.

:beat: *Gets Shot* :beat:
« Last Edit: 02 Oct 2003, 19:39:37 by The real Armstrong »
Logged
Pages: [1]   Go Up
« previous next »