Serious Buldozer Problem Plz HELP!

[x_Horst]

Hi Guys

Yesterday iI install Radeon 9800 and new dualchanel board into my machine
and install clear ver of W2k OS.

My problem is that when I start O2 {prpertly configured and on separated drive}
the Buldozer bring up error message:
ErrorMessage: Cannot create 3D device:
  Adapter -1 () Fullscreen
  Resolution 800x600, format X8R8G8B8/D16, refresh 0 Hz.
  Error D3DERR_INVALIDCALL

I try to reinstall O2 and ATI drivers and resault is still same.
I have updated ver of Buldozer.
What i have to do?Or it doesnt support Radeons(but OFP:R works cool)
PLZ H E L P

Debug.log
   0.000: MemHeap Default constructed (536870912)
   0.000: Size of FreeBlock is 20, BusyBlock 20, align is 256
   0.000: Minimal allocation size 256
   0.000: Start aligned to 100100fc (skip 252)
   0.204: Max 19 global lights
   0.610: Using DirectSound3D HW
   0.641: mode 800x600 (0 Hz) (X8R8G8B8)
   0.641: Cannot create 3D device:D3DERR_INVALIDCALL
   0.641: Resolution failed: 800x600x (0 Hz)
   0.641: ErrorMessage: Cannot create 3D device:
  Adapter -1 () Fullscreen
  Resolution 800x600, format X8R8G8B8/D16, refresh 0 Hz.
  Error D3DERR_INVALIDCALL
   5.860: Exit Error
   5.860: RStringBank destruct
   5.860: Memory should be free now.
   5.860:   2300 B not deallocated


x_Horst

[swift88]

have you considered copying the config file from operation flashpoint directory ie codemasters/operation flashpoint/flashpoint.config to the directory that buldozer is situated in (i had that prob with my nvida graphics card) P.S copy the old flashpoint config just in case
also put this into your options part where it says buldozer
C:\"directory"\buldozer.exe -noland -dx -window   (obviously directory means the route in which buldozer is)

[x_Horst]

THX Swift88

copy of Flashpoint.cfg works FINE !!!!!!!

Salute! ;D